Steel Hot Dip Galvanizing Rotating Hand Winches: Model GS (Type-SI)

Steel Rotating Hand Winches: Model GM (Type-SI)

Melting galvanized manual winch GS series
The model GM-GS hand winches are a hot-dip galvanizing series of the Maxpull hand winches.
The steel body is hot-dip galvanized, while the bolts and nuts are made of SUS-304, which makes them resistant to salt and rust. These products are cheaper than stainless winches and achieve outstanding cost performance.
With the built-in mechanical brake, the handle rotates clockwise to wind up, counterclockwise to wind down, and the brake is automatically applied at the stopped position to stop the load.
With the stopper mechanism contained in a hermetically enclosed special clutch cover, you can work to wind up and down the target equipment without the risk of malfunction.
The GS series can be manufactured for the steel (Ratchet) hand winch models.
When ordering, please specify, for example, MR-5-GS-SI, MR-5-GS.

[Model]

GM-1-GS-SI : Load Rating up to 100kgf (220lbs)	GM-3-GS-SI : Load Rating up to 300kgf (660lbs)
GM-5-GS-SI : Load Rating up to 500kgf (1,100lbs)	GM-10-GS-SI : Load Rating up to 1,000kgf (2,200lbs)
GM-20-GS-SI : Load Rating up to 2,000kgf (4,400lbs)	GM-30-GS-SI : Load Rating up to 3,000kgf (6,600lbs)

[GM Series Site Example]